LSP系列衛生型轉子泵適用于有嚴格衛生要求的食品、調味品、乳制品、制藥等相關行業。轉子泵的設計是基于無接觸的兩凸輪的同步轉動，，以適應輸送稀的或粘稠物料，甚至是含有固體的懸浮物料。堅固的齒輪箱和短軸保證*小的偏差，在沒有前軸套的條件下可以在高壓（22bars）下工作。
The Sanitary lobe pumps SLP, has been designed specially for the Food, Dairy, Pharmaceutical and related industries, for which, comply with the most stringent hygiene requirements. The pumping system based on synchronous operation of the lobes without contacting each other, make it a suitable pump for thin or viscous products, even with solids in suspension. The sturdiness of the gearbox and the short shafts resistant to deflection, allow to work at high pressure (22bars) without need of support front bushings.
The Sanitary lobe pumps LSP, use the pump head of INOXPA company，SPAIN.
LANKO朗戈轉子泵，LSP系列衛生型轉子泵
LSP－Sanitary Lobe Pumps
LSP系列衛生型轉子泵適用于有嚴格衛生要求的食品、調味品、乳制品、制藥等相關行業。轉子泵的設計是基于無接觸的兩凸輪的同步轉動，，以適應輸送稀的或粘稠物料，甚至是含有固體的懸浮物料。堅固的齒輪箱和短軸保證*小的偏差，在沒有前軸套的條件下可以在高壓（22bars）下工作。
The Sanitary lobe pumps SLP, has been designed specially for the Food, Dairy, Pharmaceutical and related industries, for which, comply with the most stringent hygiene requirements. The pumping system based on synchronous operation of the lobes without contacting each other, make it a suitable pump for thin or viscous products, even with solids in suspension. The sturdiness of the gearbox and the short shafts resistant to deflection, allow to work at high pressure (22bars) without need of support front bushings.
易維護
LSP系列衛生型轉子泵的密封件和密封座在不用拆卸管道的條件下，通過拆卸泵頭的前蓋就可以更換或拆除。
能夠進行CIP在線就地清洗。
Easy Maintenance
Seals and sealcasing (cartridge) in the SLP pump can be changed and dismantled from the front part of the pump without disconnecting it of the pipelines.
Cleaning can be effected in place (CIP).
軸封
LSP系列衛生型轉子泵的軸封采用機械密封、唇型密封或O型圈密封，有單密封和帶水沖洗兩種。
Shaft Sealing
The shaft sealing in the SLP pump it can be by mechanical seal, lipseal or O-ring seal. These arrangements, can also be supplied either with or without flushing.
朗戈轉子泵轉子
為了得到*高效率、*小的內部滑動和更長的使用壽命，轉子的幾何形狀是經過廣泛的研究，使用三維CAD設計完成。
轉子的衛生性能設計是通過前端一個O型圈和聯結軸套處一個O型圈來防止工作流體進入軸的花鍵。
Rotors
In order to get maximum efficiency, minimum internal slip and longer service life, the rotors geometry has been determined after a wide studies, using trimensional CAD technology.
Rotors are of sanitary design, provided with O-ring (head) and the shaft sleeve O-ring avoid the process liquid get to the shaft splines.
LANKO轉子泵**閥
調整**閥的壓力，當超壓時**閥打開釋放壓力。
Safety relief valve
Adjustable pressure relief valve, act as a by-pass of overpressure.
性能參數
*大流量：160m3/h
*大壓力：22bars
*高溫度：180℃
Performances
Flow up to 160m3/h
Max. pressure 22bars
Max. temperature 180℃
LANKO朗戈轉子泵特點
l 無需從管線上拆下就可以維修保養；
l 結構緊湊；
l 轉子間無摩擦；
l 有幾種轉子供選擇；
l 低噪音；
l 降低維護費用；
l 高效率；
l 可反轉；
l **閥（供選擇）；
l 進出口聯結型式：DIN、SMS、Clamp、ISO等
Advantages
l Easy maintenance without removing from pipelines
l Compact construction
l No friction between rotors
l Several rotor options
l Low noise level
l Reduced maintenance cost
l High efficiency
l Reversible
l Safety relief valve (optional)
l Several connection options DIN, SMS, Clamp, ISO
適用范圍
適用于調味品、飲料、啤酒、果汁、奶制品、制藥、糖制品、食用油、肉制品、化妝品、洗滌劑等粘稠或稀釋液體的輸送。
Applications
Condiment, Beverage, Beer, Juices, Dairy, Pharmaceutical, Confectionery, Edible oils, Meat pastes, Cosmetics, Detergents etc.
LANKO朗戈轉子泵材料
l 所有與物料接觸部件為316L不銹鋼；
l 泵軸采用高強度不銹鋼；
l O型圈為食用級丁晴橡膠（Perbunan）、硅橡膠（Silicon）、三元乙丙（EPDM）、氟橡膠（Viton）、聚四氟乙?。≒TFE）；
l 標準機械密封采用石墨－碳化硅。
Materials
l All parts in touch with the product are made of stainless 316L
l The pump shafts are high rigidity stainless
l O-rings are Food quality Perbunan (NBR), Silicon (VMQ), EPDM, Viton (FPM), PTFE
l Normal Mechanical seals are Carbon-SiC。
